Bumper- Rear

• Backup Sensor Cutouts
• Hammer Black Powder Coat Finish
• Satin Black Powder Coat Panel Finish
• Mounts For Cube Lights

See All

• 11-Gauge US Steel Construction
• Retain OEM Receiver Hitch And Wiring
• Pre-Cut Openings To Utilize Factory Sensors
• 100 Pct. Made In The USA

See All

• Integrates The Existing Receiver Hitch
• Back Up Lights
• Back Up Sensor Holes
• Retains Receiver Hitch And Wiring Locations
• Pipe And Formed Treadplate
• Gloss Black Powder Coat

See All

• Combination Pipe And Tread Plate Construction
• Gloss Black Powder Coat
• Back Up Lights Included
• Pre-Drilled Sensor Holes
• Retains OEM Receiver Hitch And Wiring Locations
• MADE IN THE USA

See All

• Blind Spot Mounts
• Backup Sensor Cutouts
• Hammer Black Powder Coat Finish
• Satin Black Powder Coat Panel Finish
• Mounts For Cube Lights

See All

• Backup Sensor Cutouts
• Hammer Black Powder Coat Finish
• Satin Black Powder Coat Panel Finish
• Mounts For Two Cube Lights

See All

• Mount Kit Sold Separately
• Popular Diamond Tread Design
• Full Size Tongue Weight of 800 lbs. And 8000 lbs. Trailer Weight
• Downsize and Compact Are 350/3500 lb. Weights
• V5 Tested Certified To SAE J684

See All

• Combination Pipe And Smooth Plate Construction
• Matte Black Powder Coat
• Pre-Drilled Sensor Holes
• Retains OEM Receiver Hitch And Wiring Locations
• MADE IN THE USA

See All

• Paintable
• Back Up Sensor Holes
• Retain OEM Receiver Hitch And Wiring Locations
• Pipe And Formed Smooth Plate Steel

See All

• Protects Vehicle From Damage Against Wildlife And Road Debris
• Provides Added Safety To Driver And Vehicle
• Heavy Duty Diamond Plate Steel
• Honeycomb Mesh Protects Grille/Gives Maximum Airflow
• 1.5 in. Headlight Protection Tubes
• 2 in. Full Wraparound Wings Ties Into Bumper
• Provisions For Factory Parking Sensors
• 2 in. Receiver Hitch/Heavy Duty 9500 lbs. Bow Shackle Mounts
• Compatible For Factory Fog Lamps Or LED Post Mount Lights
• Custom Die Cast Riveted Logo Badge
• Mounting Provisions For License Plate
• Hardware Mounting Brackets Included

See All

• 7 Gauge Steel
• 1-Piece Fully Welded Construction
• 1 in. Thick HS Shackle Mounts
• Two Flush Mount Led Lights Included
• License Plate Illumination Lights Included
• Laser-Cut HDX Logo On Ends
• Application Specific Designs
• Mounting Brackets Included
• Available With Or Without Provision For Back-Up Sensors
• Available In Textured Black Finish Or Raw

See All

• Integrated Steps On Either Side Of The Tailgate
• Durable Formed 3/16in. Steel Construction
• Retain OEM Receiver Hitch And Wiring Locations
• 3/4in. D-Ring Recovery Points
• 2 Stage Black Powder Coat

See All

• 3/16 in. Internal Structure Plating
• 1/8 in. External Steel Plating
• Reinforced Clevis Mounts
• Dimple Died Step Plates

See All

• Provides A Stable Platform While Providing Max Towing Capacity
• Black Powdercoat Finish For Superior Corrosion Resistance
• Options Are Bolt On Receiver And Black Matte Finish
• Proudly Made In The USA

See All

• Direct Fit
• Two Stage Matte Black Finish Powder Coat Finish - 5 Year Limited Warranty
• Manufactured From 3/16 and 1/4 Cold Roll Steel
• Solid Mount D-Rings Welded On The Inside And Out
• Requires O.E. Toyota Hitch For Install
• Smittybilt Advantage Warranty - Limited Lifetime Warranty

See All

• Mount Kit Included
• 2 In. Diameter Tube Frame
• Optional Class III/IV Hitch Available. Sold Separately
• Retractable License Plate Holder Conceals Receiver Hitch
• Equipped With Mount Points For Optional Auxiliary Lights
• Available For Vehicles With Or Without Backup Sensors
• Bolt-On Installation; No Drilling Required

See All

• Truck Pal; Tailgate Ladder
• Complete Assembly
• Molded Polymer Step Pads
• V5 certified
• Interchangeable Components
• 3 Year Warranty

See All

• Hammer Black Powder Coat Finish
• 10 In. Single Row Light Bar Mounts
• Parking Sensor Cutouts

See All

• Integrates With Existing Receiver Hitch
• Formed Steel Durability
• Gains Lower Steps And Recovery Points
• Stylish And Functional

See All

• Integrates With Existing Receiver Hitch
• Formed Steel Durability
• Gains Lower Steps And Recovery Points
• Stylish And Functional

See All

• Hammer Black Powder Coat Finish
• Satin Black Powder Coat Panel Finish
• Backup Sensor Cutouts
• Mounts For Cube Lights

See All

• Backup Sensor Cutouts
• Hammer Black Powder Coat Finish
• Satin Black Powder Coat Panel Finish
• Mounts For Cube Lights

See All

• Increases Ground Clearance And Angle Of Approach
• Constructed Of 10 Gauge Steel For Strength And Style
• Compatible For Blind Spot Monitors And Parking Sensors
• Accommodate For Oem Hitch And Led Back Up Lights
• Configured To Accept 2 Fm6 Led Flush Mount
• Custom Laser-Cut Westin Logo
• Hardware And Mounting Brackets Included
• Bolt-On Installation - No Drilling Required

See All

• Aggressive Styling
• Integrated Tow Hooks And D-Ring Mounts
• Double Rung Side Step
• Fab Fours Signature Knife Edge Design
• Ease Of Installation
• Includes 16 Gauge Removable Skin
• Sensor Compatible
• 2 Integrated Pod Mounts For Reverse Lights
• Stainless Steel Hardware
• 2 Stage Matte Black Powder Coat
• 11 Gauge Steel Construction
• MADE IN THE USA

See All

• Direct Fit
• Gloss black
• Robotically Welded Steel Tubing
• 5 Year Limited Warranty

See All

• 7 Gauge Steel
• 1-Piece Fully Welded Construction
• 1 in. Thick HD Shackle Mounts
• Two Flush Mount Led Lights Included
• Welded Hitch Receiver
• Laser-Cut Snyper Logo On Ends
• Mounting Brackets Mount Directly To Frame
• Textured Black Finish

See All

• Aggressive Design
• Winch Ready- Will Hold Up To 16.5K Winch (Depends On Vehicle)
• Perfectly Follows The Body Lines
• Side Mounting Slots And Tabs For Various Light Options
• Provides Far More Tire Clearance
• Integrated Shackle Mounts

See All

• Hammer Black Powder Coat Finish
• Parking Sensor Cutouts

See All

• Durable Black Powdercoated
• Made From Formed Channel
• Diamond Plated Step Plates And Skirts
• Comes Standard With Backup/Work Lights
• Factory Receiver Must Be Retained
• Black Matte Finish Is An Option
• Proudly Made In The USA

See All

• Direct Fit
• Two Stage Matte Black Powder Coat Finish
• Bumpers Bolt Directly To Your Vehicle
• Requires No Drilling Or Modifications
• 5-Year Limited Warranty

See All

• New solid D-ring and jack point mount - welded on the inside and out!
• Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions
• UHMW ;ultra-high-molecular-weight polyethylene to provide the ultimate protection for rock crawling
• Aux back up light cut out provided
• 3/16-inch cold rolled steel with two-stage textured matte black finish
• Powder coat finish 5 year limited warranty
• Smittybilt limited lifetime warranty
• Modular design; tire carrier can be added in the future.
• Class III hitch for true towing with towable d-ring

See All

• Standard Rear Bumper

See All

• Backup Sensor Cutouts
• Hammer Black Powder Coat finish With Satin Black Panels
• Mounts For Cube Lights

See All

• Hammer Black Powder Coat Finish
• Satin Black Powder Coat Panel Finish
• Mounts For Two Cube Lights
• Retains OEM Parking Sensors
• Retains OEM Tow Hitch And Trailer Plug
• Retains OEM Blind Spot Modules

See All

• Not Vehicle Specific
• 3mm Deep Drawn Formed Steel
• Winch Compatible Up To 12K
• Includes Modular Wings With Light Provisions
• Integrated D-Ring and Lift Points
• Oe Fog Light Provision
• Integrated Overrider With 13 in. Lightbar Provision

See All

• Cold Rolled Brite Steel
• OE Style Steel Step Plate
• Molded Polymer Surface
• Mount Kit Sold Separately
• 3 Year Warranty

See All

• Functional Design
• Works With 2 in. Receiver Tow Hitch
• Contoured Corners
• Allows Clearance For Spare Tire
• Black Powdercoat Finish
• 3 Year Warranty

See All

• Superior Strength And Styling
• Give Your Vehicle That Extra Cool Factor
• Two Front Side Openings Allow Light Options
• Sensor Compatible
• 11 Gauge US Steel

See All

• RotoPax Mount

See All

• 3/16-Inch Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points
• Rock Light Mount Points
• 2 Off-Road Jack Points
• No Drilling Required - Bolt On Installation
• Includes Bumper; Mounting Hardware And Install Instructions

See All

• Bolt-on design for XRC GEN2 bumpers
• Frame pivot point for added strength
• Tuned one-handed opening operation; tuned to factory tailgate
• CB and jack mounts and Roto Pax® gas can holder
• Manufactured from 3/16 in. cold rolled steel
• Two-Stage Tan

See All

• 18-Current Wrangler JL; 2-4 Door
• Adjustable Slant Tire Carrier
• Convertible Rotopax Mount Can Be Installed In Either Straight Or Slant Tire Configurations
• Included Adjustable 3rd Brake Light Bracket
• Retains OE Camera Location And Functionality
• Removable Trail Jack And Aerial Antenna Mount
• Steel Vent Cover
• Roller Bearing Pivot
• Fits Up To 40 in. Tire; With Single-Action Open And Close Feature

See All

• Direct Fit
• 2 And 4-Door Models
• Two Stage Matte Black Textured Powder Coat Finish

See All